Publications

  1.  Marcal,PV and Turner, CE, “Elastic Solution in the Limit Analysis of Shells of Revolution with Special Reference to Expansion Bellows” , Journal of Mechanical Engineering Science, (3), 252 (1961).

 

  1. Marcal,PV and Turner, CE, “Numerical Analysis of the Elastic-Plastic Behavior of Axisymmetrically loaded Shells of Revolution” , Journal of Mechanical Engineering Science, Q (3}, 232 (1963).

 

  1.  Marcal,PV and Prager, W, “Method of Optimal Plastic Design”                      Journal de Mechanique, (4}, 509 (1964).

 

  1.  Marcal,PV, “A stiffness Method for Elastic-Plastic Problems”; International Journal of Mechanical Science, 229 (1965).

 

  1.  Marcal, PV , Cheung, ST and Pilgrim, WR,”Computer Program for Elastic Analysis of Pressure Vessels”; Meeting on the Uses of Computers for Stress Analysis, 1965 ( Stress Analysis Group, Institute of Physics ). Also Central Electricity Generating Board RD/C.N/22. (1965)

 

 

  1.  Marcal,PV and Turner, CE, “Limited Life of Shells of Revolution Subjected to Severe Local Bending” , Journal of Mechanical Engineering Science, Z (4), 408 (1965).

 

  1.  Marcal, PV, ” Note on the Elastic-Plastic Thick Cylinder with Internal Pressure in the Open and Closed-end Condition”; International Journal of Mechanical Science, 841  (1965)

 

  1.  Marcal, PV, ” Optimal Plastic Design of Circular Plates”; International      Journal of Mechanical Science,         841  (1965).

 

  1.  Marcal, PV, and Pilgrim, WR, “Stiffness Method for Elastic-Plastic Shells of Revolution” ,  Journal of Strain Analysis, 1(4),             339  (1966).

 

  1.  Marcal, PV, ” Elastic-Plastic Behavior of Pipe Bends with In-plane Bending”; Journal of Strain Analysis, 2  (1),  84  (1967).

 

  1.  Marcal, PV, “A Comparative Study of Numerical Methods of Elastic Plastic Analysis”; AIAAJournal, 6 (1}, 157 (1967).

 

 

 

 

  1.  Marcal, PV, and King, IP, “Elastic-Plastic Analysis of Two-dimensional Stress Systems by the Finite Element Method” ,  International Journal of Mechanical Science,  (3),  143  (1967).

 

  1.  Marcal,PV and Turner, CE, “Elastic-Plastic Behavior of Flush Nozzles in Spherical Pressure Vessels” , Journal of Mechanical Engineering Science, (3),       182 (1967).

 

  1.  Hayes,DJ and Marcal,PV, “Determination of Upper Bounds for Problems in Plane Stress Using Finite Element Techniques” ,  International Journal of Mechanical Science,  (3),  245  (1967)

 

  1.  Marcal, PV, “The Effect of Initial Displacements on Problems of Large Deflection and Stability”;  Proceedings of ASCE Joint Specialty Conference,  Optimization and Nonlinear  Problems (April, 1968).  Also Brown University Report,   ARPA E54, (November  1967).

 

  1.  Marcal, PV, and Mallett,RH, “Finite Element Analysis of Nonlinear Structures” , Proceedings of ASCE, Journal of Structural Division,  94  (ST9), 2081 (1968)

 

  1.  Marcal, PV, and Mallett,RH, “On Consistent Matrices for Finite Displacement and Stability Analysis” (with H. Mallett); Proceedings of ASCE, Joint Specialty  Conference  on Optimization and Nonlinear  Problems Chicago, 45 ( April 1968)

 

  1.  Marcal, PV, “Elastic-Plastic Analysis of Pressure Vessel Components”; Proceedings of ASME Computer Seminar, First Pressure Vessel and Piping Division Conference, Dallas, Texas,  71 (1968).

 

19.Gellatly,RA and Marcal, PV,  “Application of the Created Response Surface Technique  to            “Structural Optimization”  ,  Proceedings of Second Conference  on Matrix Methods of Structural  Mechanics, AFFDL, Dayton (1968)

 

  1. “Elastic-Plastic Analysis of Flat Plates by the Finite Element Method” (with R.H. Mallett); Proceedings of ASME Winter Annual Meeting,  Paper 68- WA/PVP-10, New York (1968)

 

  1.  Marcal, PV, “Large Deflection Analysis of Elastic-Plastic Shells of Revolution”; AIAA Journal, 8 (9),   1627  (1970).  Also Brown University Report, N00014-0004/1,  (December  1968).
  1.  Marcal, PV, “Finite Element Analysis of Combined Problems of Nonlinear Material and Geometric Behavior”; Proceedings of ASME Computer Conference  on Computational Approaches in Applied Mechanics,   Chicago,  133 (June,1969).  Also Brown University Report, N00014-0007/1, (March 1969).

 

 

  1.  Marcal, PV, “Large Deflection Analysis of Elastic-Plastic Plates and Shells”; Proceedings of First International Conference on Pressure Vessel Technology,ASME/Roy.   Netherlands  Engineering  Society, Delft (September 1969).  Also Brown University  Report,  N00014-0006/1, (June 1969).

 

  1. Marcal, PV, “Finite Element Analysis with Material Nonlinearities-Theory and Practice”; Proceedings of Japan-U.S. Seminar on Matrix Methods of Structural Analysis and Design, Tokyo, Japan (August 1969). Also Brown University Report, N00014-0007/3, (August 1969).

 

  1.  Hibbitt, HD and Marcal, PV, “Hybrid Finite Element Analysis with Particular Reference to Axisymmetric Structures” , Proceedings of AIAA Eighth Aerospace Sciences Meeting  (January 1970).

 

  1.  Hibbit, HD, Rice, JR and Marcal, PV, “A Finite Element Formulation for Problems for Large Strain and Large Displacement” , International Journal of Solids and Structures,  , 1069  (1970).   Also Brown University  Report, N00015-0007/2,  (June 1969).

 

  1.  Marcal, PV, “On General Purpose Programs for Finite Element Analysis, with Special Reference to Geometric and Material Nonlinearities”, Proceedings of Symposium on Numerical Solution of Partial Differential Equations, University of Maryland (May 1970).  Also Brown University  Report,  ARPA E73,  (May1970).

 

 

  1. Pfaffinger, DD, Dupuis, GA and Marcal, PV, “Effective Use of the Incremental Stiffness Matrices in Nonlinear Geometric Analysis” , Proceedings of IUTAM Symposium on High Speed Computing of Elastic Structures,  Liege, Belgium (August 1970).  Also Brown University  Report, N00014-0007/5, (September,1970).

 

 

  1.  Levy, NJ, Hibbitt, HD and Marcal, PV, “On General Purpose Programs for Nonlinear Finite Element Analysis”  ,  Proceedings of Symposium on General Purpose Finite Element Computer Programs,  American Society of Mechanical Engineers,  Edited by P. V. Marcal  (November  1970).

 

 

 

 

  1.  Levy, NJ and Marcal, PV, “Three-Dimensional Elastic -Plastic Stress and Strain Analysis for Fracture Mechanics. Phase 1: Simple Flawed Specimens” (with J. Levy); Brown University Report,  HSSTP-TR-12,  (December  1970).

 

  1.  McNamara, SF, Hibbitt, HD, Dupuis, GA and Marcal, PV, “Non-linear Material and Geometric Behavior of Shell Structures” ,  Computers and Structures 1,223  (1971).   Also Brown University Report,  N00014-0008/3(September 1970).

 

.
  1.  Ostergren, WJ, Levy, NJ, Rice, JR and Marcal, PV, “Small Scale Yielding Near a Crack in Plane Strain: A Finite Element Analysis”  , International Journal of Fracture Mechanics,                                (2),  143  (1971). Also Brown University Report, NASA NGL 40-002-080/1,  (November 1969).

 

  1. McNamara, SF , Desaulniers, WE and Marcal, PV, “Static and Dynamic Nonlinear Analysis by the Finite Element Method” , Proceedings of ONR International Symposium on Numerical and Computer Methods in Structural Mechanics, Urbana, Illinois ( September 1971).

 

  1. 34. Levy, NJ and Marcal, PV, “Three-Dimensional Elastic-Plastic Stress and Strain Analysis for Fracture Mechanics, Phase 2; Improved Modeling” ,  Brown University Report, HSSTP-TR-17, (November 1971).

 

  1. Levy, NJ , Rice, JR and Marcal, PV, “Progress in Three-Dimensional Elastic-Plastic Stress Analysis for Fracture Mechanics” , Journal of Nuclear Engineering and Design,17, 64  (1971).

 

  1.  Stuart, PM , Bettes RS and Marcal, PV, “Elastic-Plastic Behavior of a Longitudinal Semi-Elliptic Crack in a Thick Pressure Vessel” , Proceedings of Sixth Annual Information Meeting, Heavy Section Steel Technology Program, Oak Ridge National Laboratory, Tennessee (April 1972).

 

  1.  Marcal, PV, “Survey of General Purpose Programs for Finite Element Analysis”; Advances in Computational Methods of Structural Mechanics and Design, Proceedings of Second S. – Japan Seminar on Matrix Methods of Structural Analysis and Design, Berkeley ( August 1972).

 

  1.  McNeice, GM and Marcal, PV, “Optimization of Finite Element Grids Based on Minimum Potential Energy” , Proceedings of Petroleum Mechanical Engineering Conference with Pressure Vessel and Piping Conference, ASME,  New Orleans (September 1972).  Also Brown University Report, N00014-0007/7, (June 1971).

 

 

 

 

  1.  Marcal, PV, “Three-Dimensional Finite Element Analysis for Fracture Mechanics”; Proceedings of Symposium on the Surface Crack: Physical Problems and Computational Solutions, ASME,  New York  (November  1972).

 

  1. McNamara, JF and Marcal, PV, “Incremental Stiffness Method for Finite Element Analysis of the Nonlinear Dynamic Problem” , Numerical and Computer Methods in Structural Mechanics edited by S. J.  Fenves, New York, Academic Press, 353  (1973).

 

  1.  Stuart, PM , Bettes RS and Marcal, PV, “Elastic-Plastic Behavior of a Longitudinal Semi-Elliptic Crack in a Thick Pressure Vessel” , Brown University Report,  HSSTP-TR-28,  (June 1973).

 

  1.  Nickell, RE and Marcal, PV, “In-Vacuo Modal Dynamic Response of the Human Skull” (with E. Nickell); Proceedings of ASME Design Engineering Technical Conference, Cincinnati, Ohio (September 1973). Also Brown University Report,   N00014-0007/11, (July 1973).

 

  1. Hibbitt, HD and Marcal, PV, “A Numerical Thermo-Mechanical Model for the Welding and Subsequent Loading of a Fabricated Structure” , International Journal of Computers and Structures,  Vol. 3, No. 5,  (September 1973),  pp.  1145-1174. Also Brown University Report, N00014-0006/2, (March 1972).

 

  1.  Hardy, CH and Marcal, PV, “Elastic Analysis of a Skull”, Trans. ASME, Journal of Applied Mechanics, 40. Series e, No. 4, pp 833 -842 (December  1973),Also Brown University Report, N00014-0007/8, (November  1971).

 

 

  1.  Hibbitt, HD ,Sorensen, EP and Marcal, PV,” Elastic Analysis and Creep Analysis of Pipelines by Finite Elements” ,  Proceedings of Second International Conference on Pressure Vessel Technology,   (1973).

 

  1. Marcal, PV, “General Purpose Program for Finite Element Analysis with Reference to Interaction Between Software and Hardware”; Presented at Tokyo Seminar on Finite Element Analysis,  (November  1973).

 

  1. Marcal, PV, “Survey of Computer Analysis of Weld Problems”; International Symposium on Structural Mechanics  Software; Virginia,  (June 12-14 , 1974).
  2. Marcal, PV, “Some Current Finite Element Models for Material Behavior”;  Strength and Structure of Solid Materials; U. S.-Japan Joint Seminar, (October 7-11,1974).

 

 

 

 

  1. Marcal, PV, “On a General Purpose Program for Non-Linear Finite Element Analysis with Special Reference  to Material Behavior”;   Proceedings of Symposium on Non-Linear  Techniques  and Behavior in Structural Analysis,   (December1974).

 

 

  1. Buyukozturk, O and Marcal, PV, “Strength of Reinforced Concrete Chambers Under External Pressure” ,; 2″d National Congress on Pressure Vessel and Piping, ASME paper no. 75-PVP-7, (June 1975)

 

  1. 51. Messier, R.H and Marcal, PV, “A Finite Element Algorithm for the Determination of Dynamic Buckling ” , Proceedings of Symposium on Finite Element Analysis of Transient  Non-Linear  Structural Behavior, (1975)

 

  1. Marcal, PV, “Finite Element Methods for Inelastic Analysis of Cracks, ISPRA Conference, Italy, (October 1975).

 

  1.  Hatt, F , Melosh, RJ and Marcal, PV, “Nonlinear Dynamic Pipewhip Analysis” , F.M. Congress,  Germany,  (November  18-19, 1975).

 

54.      Marcal, PV,  “General Purpose Program for Finite Element Analysis,  some Computational     Considerations”;  Proceedings of the Third ICASE conference  on Scientific Computing,  (March 1976).

 

  1. Sorensen, EP and Marcal, PV, “A Solid Mechanics Approach to the Solution of Fluid-Solid Vibration Problems by Finite Elements”, Brown University Report, N00014-0004/1 (May 1976).

 

  1.  Marcal, PV, “Impact of Computers on Pressure Vessel and Piping Technology”; Third International  Conference on Pressure Vessel Technology, Tokyo,  (April1977).

 

 

  1. Marcal, PV, “Nonlinear Analysis with a General-Purpose Program in a Commercial Environment”;   FEM Conference, Bath, England,  (1977).

 

 

  1.  Marcal, PV, “Knowledge Engineering and Artificial Intelligence”; Advanced Topics and New Developments  in Finite Element Analysis, ASME WAM, Monterey, California,  (July, 1978).  Result of work with J. Melosh and E.A. Feigenbaum on the development  of SACON.Marcal, Pedro V.

 

 

 

  1. Marcal, PV, “Interactive Computing and the Effect of the Hardware and Software Environment”; Advanced Topics and New Developments in Finite Element Analysis, Presentation, Monterey, California,  (July 17-21, 1978).

 

  1. 60. Marcal, PV, “Finite Element Analysis of Process of Steel Rolling”; American Society of Mechanical Engineers Winter Annual Meeting, (December 1978).

 

  1.  Marcal, PV, “Information Management and the Electronic Office System”; AlEE Automated Office Conference, San Francisco, (March 12-14, 1979).

 

  1.  Marcal, PV, “Consistency and Control”; Mechanical Engineering Magazine, Issue on Quality. Guest Editor V. Marcal, (January 1988).

 

  1.  Marcal, PV, “Past and Future Challenges in Nonlinear Finite Element Analysis”; FEM Methods in the Design Process, Proceedings Sixth World Congress, Banff, Canada, (1990).

 

  1.  Marcal, PV, “Keynote Presentation on Total Quality Control”; International Pressure Vessel and Piping Conference, Hawaii, (1991).

 

 

  1. 65. Marcal, PV, “Riding the Commodity Wave”; Machine Design, (February 1992).

 

  1. Marcal, PV, “Constructive Solid Geometry, the CAD-FEM Connection”,Proceedings Fifth International Meshing Roundtable, (October 1996).

 

  1. Racz, S and Marcal, PV, “SACON2, An Expert System for Automating the FEM Process”, Proc. WCCM, 2006

 

  1. Fong, J. T., Filliben, J. J., deWit, R., Fields, R. J., Bernstein, B., and Marcal, P. V., “Uncertainty in Finite Element Modeling and Failure Analysis: A Metrology-Based Approach,” ASME Transactions, Journal of Pressure Vessel Technology, Vol. 128, pp. 140-147 (2006).

 

69..      Fong, J. T., Filliben, J. J., Ranson, W. F., and Marcal, P. V., 2006, “A Real-Time Non-Contact and Direct-Measurement-based Fatigue Life Prediction Methodology with Uncertainty & Risk Analyses,” Proc. National Nuclear Security Admin (NNSA) Future Technologies Conference II, Track Four (Future Trends in Analysis and Characterization), Oct. 11-12, 2006, Washington, DC,  http://www.dcslsinc.com/technology (2006).

 

70        Marcal, P. V., and Fong, J. T., “Continuous NDE Monitoring via Web Technology,” Proc. 2008 ASME PVP Division Conf., July 27-31, 2008, Chicago, IL, Paper No. PVP2008-61574.  New York, NY: American Society of Mechanical Engineers, http://www.asmeconferences.org/PVP08 (2008).

 

 

71        Fong, J. T., Ranson, W. F., III, Vachon, R. I., and Marcal, P. V., “Structural Aging Monitoring via Web-based Nondestructive Evaluation (NDE) Technology,” Proc. 2008 ASME PVP Division Conf., July 27-31, 2008, Chicago, IL, Paper No. PVP2008-61607.  New York, NY: American Society of Mechanical Engineers, http://www.asmeconferences.org/PVP08 (2008).

 

72        Fong, J. T., Filliben, J. J., Heckert, N. A., and Marcal, P. V., “An Intelligent Flaw Monitoring System: From Flaw Size Uncertainty to Fatigue Life Prediction with Confidence Bounds in 24 Hours,”  Proc. 8th World Congress on Computational Mechanics, June 30 -July 5, 2008, Venice, Italy (2008)

 

73        Fong, J. T., Marcal, P. V., Hedden, O. F., Chao, Y. J., and Lam, P. S., “A Web-based Uncertainty Plug-In (WUPI) for Fatigue Life Prediction Based on NDE Data and Fracture Mechanics Analysis,”

Proc. ASME Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, The Czech Republic, Paper No. PVP2009-77827.  New York, NY: ASME, http://www.asmeconferences.org/PVP09 (2009).

 

74        Fong, J. T., deWit, P., Marcal, P. V., Filliben, J. J., and Heckert, N. A., “A Design-of-

Experiments Plug-In for Estimating Uncertainties in Finite Element Simulations,” Proceedings of 2009 International SIMULIA Conference, May 18-21, 2009, London, U.K., pp. 828-842.  Providence, RI: SIMULIA-Dassault Systemes Simulia Corp. (2009).

 

75        Fong, J. T., Marcal, P. V., Hedden, O. F., Chao, Y. J., and Lam, P. S., “A Web-based Uncertainty Plug-In (WUPI) for Fatigue Life Prediction Based on NDE Data and Fracture Mechanics Analysis,”

Proc. ASME Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, The Czech Republic, Paper No. PVP2009-77827.  New York, NY: ASME, http://www.asmeconferences.org/PVP09 (2009).

 

76        Fong, J. T., deWit, P., Marcal, P. V., Filliben, J. J., and Heckert, N. A., “A Design-of-

Experiments Plug-In for Estimating Uncertainties in Finite Element Simulations,” Proceedings of 2009 International SIMULIA Conference, May 18-21, 2009, London, U.K., pp. 828-842.  Providence, RI: SIMULIA-Dassault Systemes Simulia Corp. (2009).

 

77        Marcal, P. V., Fong, J. T., and Yamagata, N., “Artificial Intelligence (AI) Tools for Data Acquisition and Probability Risk Analysis of Nuclear Piping Failure Databases,” Proc. ASME Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, The Czech Republic, Paper No. PVP2009-77871. New York, NY: Amer. Soc. of Mech. Engineers, http://www.asmeconferences.org/PVP09 (2009).

 

78        Fong, J. T., and Marcal, P. V., “A Dataplot-Python-ANLAP (DPA) Plug-In for High Temperature Mechanical Property Databases to Facilitate Stochastic Modeling of Fire-Structure Interactions,”

Proc. ASME Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, The Czech Republic, Paper No. PVP2009-77867.  New York, NY: ASME, http://www.asmeconferences.org/PVP09 (2009).

 

79        Fong, J. T., and Marcal, P. V., “Artificial Intelligence Tools for Failure Event Data Management and Probabilistic Risk Analysis for Failure Prevention,” Proc. Materials Science & Technology 2009 Conference, Pittsburgh, PA, Oct. 25-29, 2009, Charles R. Morin Memorial Symposium on Failure Analysis and Prevention, R. Parrington and D. McGarry, eds., American Ceramic Society, Association for Iron & Steel Technology, ASM International, and Minerals, Metals & Materials Society (2009).

 

80        Fong, J. T., deWit, R., Marcal, P. V., Filliben, J. J., Heckert, N. A., and Gosselin, S. R., “Design of a Python-based Plug-In for Benchmarking Probabilistic Fracture Mechanics Computer Codes with Failure Event Data,” Proc. ASME Pressure Vessels & Piping Conference, July 26-30, 2009, Prague, The Czech Republic, Paper No. PVP2009-77974.  New York, NY: Amer. Soc. of Mech. Engineers, http://www.asmeconferences.org/PVP09 (2009).

 

81        Fong, J. T., Swanson, D., and Marcal, P. V., “Quantitative Nondestructive Evaluation (QNDE): Key to Developing Tools for Sophisticated Manufacturing and Product Longevity,” manuscript completed for submittal to the Conference Proceedings for the 39th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), 15-20 July 2012, Denver, Colorado.

 

82      Yamagata, N and Marcal , PV, “Structural Dynamic Analysis for Fracture”,               Proc. USNCCM-9 , Los Angeles, 2007

 

83     Yamagata, N and Marcal , PV,  “Dynamic Fracture Effects on Earthquakes”,

Proc. WCCM-10 Brazil,2012.

84. P.V. Marcal, J.T. Fong, R. Rainsberger, L. Ma,  Finite Element Analysis of a Pipe Elbow Weldment Creep-Fracture Problem Using an Extremely Accurate 27-node Tri-Quadratic Shell and Solid Element Formulation, Proc. International Conf. on Pressure Vessel Technology, ICPVT-14, Sep. 23-26,  Shanghai, China, 2015.

85. J.T. Fong, J.J. Filliben, N.A. Heckert, P.V. Marcal, R. Rainsberger, L. Ma, Uncertainty Quantification and Extrapolation of Finite Element Method-estimated Stresses in a Cracked Pipe Elbow Weldment using a Logistic Function Fit and a Nonlinear Least Square Algorithm, Proc. International Conf. on Pressure Vessel Technology, ICPVT-14, Sep. 23-26,  Shanghai, China, 2015.

 

86. J.T. Fong,  R. Rainsberger, P.V. Marcal, J.J. Filliben, N.A. Heckert, L. Ma, A Super-Parametric Approach to Assessing the Accuracy of Finite Element Method-estimated Results by Increasing Mesh Density and Varying Element Types using ABAQUS and MPACT, Proc. International Conf. on Pressure Vessel Technology, ICPVT-14, Sep. 23-26, 2015, Shanghai, China, 2015

87. P.V. Marcal, J.T. Fong, R. Rainsberger, L. Ma, A HIGH-ACCURACY APPROACH TO FINITE ELEMENT ANALYSIS USING THE HEXA 27-NODE ELEMENT , Proc. ASME PVP-2016, Vancouver, Canada, 2016.PVP2016-63715_Marcal

 

88. R. Rainsberger, J.T. Fong,  P.V. Marcal, A super-parametric approach to estimating accuracy and uncertainty of the finite element method ,  Proc. ASME PVP-2016, Vancouver, Canada, 2016.

 

89.  J.T. Fong, J.J. Filliben, N.A. Heckert, P.V. Marcal, R.Rainsberger, L. Ma, Uncertainty Quantification of Stresses in a Cracked Pipe ElbowWeldment using a Logistic Function Fit, a Nonlinear Least Square Algorithm, and a Super-Parametric Method, , Proc. ASME PVP-2016, Vancouver, Canada, 2016.

90. R. Rainsberger, P V Marcal, A Domain Language for Constructive Block Topology for Hexa Mesh Generation, Proc. ICCM 2016, Berkeley, August 2016.

91. P.V.Marcal, Automatic Programming Via Text Mapping To Expert System Rules, Proc. ICCM 2016, Berkeley, August 2016.Automatic Programming With Expert Systems

92. A. DeRossett, P V. Marcal, Model Free Deep Learning With Deferred Rewards For Maintenance Of Complex Systems, Proc. ICCM 2016, Berkeley, August 2016

model_Free_DeRossett.pdf

93. P.V. Marcal, Development of a General Purpose Semantic Parser, to be published.Development of GPSR.

94. P.V.Marcal,J.T.Fong, and N.Yamagata, A Macro Model for 3D Fiber-Reinforced Polymer Composites, Proc. WCCM, Barcelona, 2014. Also Design and Analysis of Reinforced Fiber Composites, editors P.V.Marcal,N.Yamagata, Springer, 2016.

95.  P.V. Marcal, J.T. Fong, R. Rainsberger, Multi-Objective Optimization of FEA Problems with Q-Learning and Design of Experiments. to be published,2016.

Marcal QFEM

96. P.V.Marcal, J.T. Fong, A Comparison of Two Approaches to Statistical Parsing of NLP : Design of Experiment vs. Deep Learning, to be published, 2016

Comparison of NLP Procedures

97. P.V. Marcal, J.T. Fong, R. Rainsberger, Least Squares Finite Element Interpolations for Analysis of Model Free Problems, to be published, 2016

least-squares-fe-for-ann

98. P.V. Marcal, R. Rainsberger, J.T. Fong, A Metric For Mesh Quality in Finite Element Analysis with Isoparametric Elements, Proc. ICCES 2017

Error Norms

99. P.V.Marcal, A Note On Initiation of Turbulence, unpublished, May 2017.

Note on Initiation of turbulence

100. P.V.Marcal, Nonlinear Regimes that Challenges Us in Finite Element Analysis, ICCES 2017 invited Lecture, June 2017.

Nonlinear Regimes That Challenges